Pickup points guidelines
K1-DELTA for azimuth control
To control the azimuth of a own K2 line, attach the K1-DELTA to the rear pickup point. The recommended space between
the two lifting point is 1 m / 33 ft.
By adjusting the height of both pickup points you can adjust the azimuth angle from -10° to +10°.
K1-BPCHAIN with a climbing hoist
With a climbing hoist you must use a K1-BPCHAIN adjustable sling to prevent the chain bag from hanging in front of the
top enclosures of the array.
184 K2 owner's manual (EN) version 1.1
To Next Page
