Rigging system description
K2-RIGBAR
The K2-RIGBAR can be used to implement a pullback either with K2-BUMP / K2-BAR or another K2-RIGBAR.
It must be used with the LA-SLING2T.
The K2-RIGBAR can also be used as the main lifting point, thus providing a lighter solution for ying K2 enclosures with
one lifting point.
Refer to N - Using a K2-RIGBAR to implement a pullback (p.120) for more information on how to implement a
pullback.
K2 owner's manual (EN) version 1.1 25
To Next Page
Loading...
