USER’S MANUAL OF LK-330E
LABEL & MARK INDUSTRIES COMPANY
5
with a wet hand.
13) Do not use AC power supply exceeding 110V—240V in voltage.
14) Keep the tube printer away from alcohol, gasoline and other volatile solvents;
keep it away from fire to avoid explosion or burning.
15) Clean the printer with a wrung wet cotton cloth. Use of organic and flammable
solvent is prohibited.
16) In case of strange odor or noises during operation, switch off the printer
immediately and disconnect the power supply and then contact your sale agent.
17) Stop the printer immediately if any foreign matter is introduced inside the
printer in order to avoid damaging it.
18) This printer prints only on sleeve tubes or heat shrink tubes with Ф≦6.0mm.
Printing on tubes Ф>6.0mm may damage the printer.
To Next Page
Loading...
