21. To display or modify the Total Weight of the Single Animal, when the [ recipe name ]
message appears on the display, press the DMI key. The DMI symbol will light up and
the [
DMI
] message and the programmed value will appear alternately on the display.
To modify the value, use the q z (e) keys or the Alphanumeric Writing (2FN).
To exit, press the DMI key or the OK key. The [
WAIT
] message will appear on the
display. All of the Recipe programmed values will be modified in proportion to the
change made.
22. To display the Recipe Total Weight, press the Net/Total key and keep it pressed.
The [
TOTAL
] message and programmed value will appear on the display.
23. To program the Automatic Mixing Function, see chapter 4.4 - Automatic Mixing.
r Important: when using the Recipe Programming Activity it is also possible to:
• Press the Tare key to activate the No-Load Tare Function.
• Press the Menu key to select the Special Function Menu.
• Press the ID/Print key for 2 seconds to activate the Identification Code Function.
• Press the Prog./Start key to enter the Recipe Execution Activity.
• Press the Man./Zero key to enter the Manual Weighing Activity.
• Press the ? key to activate the Help Function.
• Use the Data Transfer Function through the T-Data8 Plug device or the Label
Wireless Linker card. r
chApter 3 25
To Next Page
Loading...
Need help?
General