3.2.3 - RECIPES BY ANIMAL NUMBER WITH DIVIDED UNLOADS
1. When switching on the equipment automatically enters the Recipe Programming
Activity. The PROG. symbol lights up on the display and the [ recipe name ] message
appears.
If no name has been assigned to the Recipe, the [
REC
x
] message will appear on
the display, where x indicates the progressive number of the Recipe selected.
2. To select the Recipe to be programmed or executed, press the Recipe key, Recipe
and e or the q z (e).
3. To modify the Recipe Name (max. 6 alphanumeric characters), use the
Alphanumeric Writing (2FN).
4. Enable the Recipe to be programmed by Animal Number, by pressing the Animal
key. The message [
N. HEADS
] will appear on the display along with the previously
programmed value. Select [
AUTO
] by pressing the q z (e) keys, if the “0” value
appears on the display, to display [
AUTO
] press the z key one time only. Confirm by
pressing the Animal key or the OK key. The equipment will light up g next to the
symbol
and the ANIMAL symbol.
r Important: for this type of Recipe, program first all the Ingredients and then all the
Unloads. r
5. To set a Recipe to the Daily mode, select the Recipe and press the OK key for 2
seconds. Release the key when g appears on the display next to the symbol .
The g will appear next to the symbol each time the Daily Recipe is displayed.
r Important: to set a Recipe to the Daily mode, the Daily Recipe Function (see
chapter 4.13.9) must be enabled; the maximum programmable number of
Ingredients/Unloads in the Daily Recipe is half the number programmed in the
standard Recipes. r
6. To copy a Recipe into another position in the Archive, select the Recipe and press
the OK key for 4 seconds. Release the key when, after the [
COPY
] message
appears, the display goes back to the [ recipe name ] message. The E symbol will
appear on the display to indicate that the Recipe Copy Function has been selected.
Select the Recipe in which the data is to be copied by pressing the q z (e) keys.
Confirm by pressing the OK key for 2 seconds. The [
INSER.
] message will appear on
the display. To exit from the Function without copying the Recipe, press the Clear key
for 2 seconds.
7. To delete the data memorized in the Recipe (Name, Name and weight of the
Ingredients/Unloads, parameters) press the Clear key for 4 seconds.
The [
DELETE
] message and the Recipe Name will appear alternately on the display.
user’s guide22
To Next Page
Loading...
Need help?
General