15. To display or modify the Total Weight of the Single Animal, when the [ recipe name ]
message appears on the display, press the DMI key. The DMI will light up on the display
and the [
DMI
] message and the programmed value will appear alternately.
To modify the value, use the q z (e) keys or the Alphanumeric Writing (2FN).
To exit, press the DMI key or the OK key. The [
WAIT
] message will appear on the
display. All the Recipe’s programmed values will be modified in proportion to the
variation made.
16. To display the Recipe Total Weight, press the Net/Total key and keep it pressed.
The [
TOTAL
] message and the programmed value will appear on the display.
If the Feed Refusal Adjustment Function is enabled (see chapter 4.13.8) the Total
Ingredient Weight will appear first followed by the Total Unload Weight.
17. To program the Automatic Mixing Function, see chapter 4.4 - Automatic Mixing.
r Important: when using the Recipe Programming Activity it is also possible to:
• Press the Tare key to activate the No-Load Tare Function.
• Press the Menu key to select the Special Function Menu.
• Press the ID/Print key for 2 seconds to activate the Identification Code Function.
• Press the Prog./Start key to select the Recipe Execution Activity.
• Press the Man./Zero key to select the Manual Weighing Activity.
• Press the ? key to activate the Help Function.
• Use the Data Transfer Function through the T-Data8 Plug device or the Label
Wireless Linker card. r
chApter 3 21
To Next Page
Loading...
Need help?
General