4.13.7 - CLEARING OF THE INGREDIENT/UNLOAD NAME ARCHIVE
This Function allows a Name to be cancelled from the Ingredient/Unload
Name Archive. The Archive can memorize up to 150 different Ingredient/
Unload Names.
1. Select the [
NAME
] Function on the display and confirm by pressing the
OK key.
2. The Name of the first Ingredient/Unload memorized in the Archive will
appear on the display.
3. Select the Ingredient/Unload to be cancelled by pressing the q z (e)
keys.
4. To cancel the Name from the Archive press the Clear key for 4 seconds.
The [
DELETE
] message and the Name selected will appear alternately
on the display.
If the selected Name is not memorized in any Recipe, after 4 seconds
the equipment will cancel the Name, as indicated by the [
WAIT
]
message. On the other hand, if the selected Name is memorized in
one or more Recipes, after 4 seconds the [
NAME USED
] message
will appear on the display. Release the Clear key. To undo the cancel
command and exit from the Procedure, press the OK key. Otherwise,
to confirm the cancellation press Clear once again for 4 seconds. The
[
DELETE
] message and the Name selected will appear alternately on
the display. During the cancellation process the [
WAIT
] message will
appear on the display. At the end of the process the equipment will
return to the Special Function Menu.
• If an Ingredient/Unload is cancelled from the Ingredient/Unload Name
Archive, its totalizator will automatically be reset to zero (see chapters
4.13.3 and 4.13.4).
• If new Recipes are imported with the Data Transfer Function, the Archive
will be recreated.
user’s guide58
To Next Page
Loading...
Need help?
General