3.2.2 - RECIPES BY ANIMAL NUMBER
1. When switching on the equipment automatically enters the Recipe Programming
Activity. The PROG. symbol lights up on the display and the [ recipe name ] message
appears.
If no name has been assigned to the Recipe, the [
REC
x
] message will appear,
where x indicates the progressive number of the Recipe selected.
2. To select the Recipe to be programmed or executed, press the Recipe key, Recipe
and e or the q z (e) keys.
3. To modify the Recipe Name (max. 6 alphanumeric characters), use the
Alphanumeric Writing (2FN).
4. Enable the Recipe to be programmed by Animal Number, by pressing the Animal key.
The message [
N. HEADS
] will appear on the display along with the previously
programmed value. Program the Animal Number (max. 999) using the q z (e) keys
or the Alphanumeric Writing (2FN). Confirm by pressing the Animal key or the OK
key. The equipment will light up the ANIMAL symbol. The ANIMAL symbol will light
up on the display each time a Recipe by Animal Number is shown.
5. To set a Recipe to the Daily mode, select the Recipe and press the OK key for 2
seconds. Release the key when g appears on the display next to the symbol .
The g will appear on the display next to the symbol each time the Daily Recipe
is shown.
r Important: to set a Recipe to the Daily mode, the Daily Recipe Function (see
chapter 4.13.9) must be enabled; the maximum programmable number of
Ingredients/Unloads in the Daily Recipe is half the number programmed in the
Standard Recipes. r
6. To copy a Recipe into another position in the Archive, select the Recipe and press
the OK key for 4 seconds. Release the key when, after the [
COPY
] message
appears, the display goes back to the [ recipe name ]. The display shows the E
symbol to indicate that the Recipe Copy Function has been selected. Select the
Recipe in which the data is to be copied by pressing the q z (e) keys. Confirm
by pressing the OK key for 2 seconds. The [
INSER.
] message will appear on the
display.
To exit from the Function without copying the Recipe, press the Clear key for 2
seconds.
7. To delete the data memorized in the Recipe (Name, Name and weight of the
Ingredients/Unloads, parameters) press the Clear key for 4 seconds.
The [
DELETE
] message and the Recipe Name will appear alternately on the display.
chApter 3 19
To Next Page
Loading...
Need help?
General