3.2.4 - RECIPES BY ANIMAL NUMBER WITH DIVIDED UNLOADS ONLY
1. When switching on the equipment automatically enters the Recipe Programming
Activity. The PROG. symbol lights up on the display and the [ recipe name ] message
appears.
If no name has been assigned to the Recipe, the [
REC
x
] message will appear,
where x indicates the progressive number of the Recipe selected.
2. To select the Recipe to be programmed or executed, press the Recipe key, Recipe
and e or the q z (e) keys.
3. To modify the Recipe Name (max. 6 alphanumeric characters) use the Alphanumeric
Writing (2FN).
4. Enable the Recipe to be programmed by Animal Number, by pressing the Animal
key. The message [
N. HEADS
] will appear on the display along with the previously
programmed value. Select [
AUTO
] by pressing the q z (e) keys; if the “0” value
appears on the display, to display [
AUTO
], press the z key one time only. Confirm
by pressing the Animal key or the OK key. The equipment will light up g next to the
symbol
and the ANIMAL symbol.
5. To copy a Recipe into another position in the Archive, select the Recipe and press
the OK key for 4 seconds. Release the key when, after the [
COPY
] message
appears, the display goes back to the [ recipe name ]. The display shows the E
symbol to indicate that the Recipe Copy Function has been selected. Select the
Recipe in which the data is to be copied by pressing the q z (e) keys.
Confirm by pressing the OK key for 2 seconds. The [
INSER.
] message will appear on
the display. To exit from the Function without copying the Recipe, press the Clear key
for 2 seconds.
6. To delete the data memorized in the Recipe (Name, Name and weight of the
Ingredients/Unloads, parameters) press the Clear key for 4 seconds.
The [
DELETE
] message and the Recipe Name will appear alternately on the display.
7. To program an Unload, an Ingredient must first be transformed into an Unload by
changing the Load Parameter into an Unload.
To modify the Parameter, select the Ingredient by pressing the Ingr.,
Ingr. and e or Block and Ingr. keys. The Name and the programmed weight with a
resolution of 0.01 kg/lbs will appear alternately on the display. If no Name has been
assigned to the Ingredient, the [
ING
x
] message will appear on the display, where
x indicates the progressive number of the Ingredient selected. Press the OK key for
2 seconds. The [
UNLOAD
] message will appear on the display, the LOAD symbol will
turn off and the UNLOAD symbol will light up. To change the Parameter from Unload
to Load, repeat the same procedure.
user’s guide26
To Next Page
Need help?
General