14. To delete the selected Ingredient/Unload (Name, weight and parameters) from
the Recipe, press the Clear key for 4 seconds. The [
DELETE
] message and the
selected Name will appear alternately on the display.
15. To display the Total Recipe Weight, press the Net/Total and keep it pressed.
The [
TOTAL
] message and programmed value will appear on the display.
If the Feed Refusal Adjustment Function is enabled (see chapter 4.13.8) the Total
Ingredient Weight will appear on the display followed by the Total Unload Weight.
16. To program the Automatic Mixing Function, see chapter 4.4 - Automatic Mixing.
r Important: when using the Recipe Programming Activity it is also possible to:
• Press the Tare key to activate the No-Load Tare Function.
• Press the Menu key to select the Special Function Menu.
• Press the Net/Total key to activate the Modify Total Recipe Weight Function.
• Press the ID/Print key for 2 seconds to activate the Identification Code Function.
• Press the Prog./Start key to enter the Recipe Execution Activity.
• Press the Man./Zero key to enter the Manual Weighing Activity.
• Press the ? key to activate the Help Function.
• Use the Data Transfer Function through the T-Data8 Plug device or the Label
Wireless Linker card. r
user’s guide18
To Next Page
Loading...
Need help?
General