• By confirming the Send command, the data of the 3000 Weighing
Operations Archive will be transferred and memorized in the T-Data8
Plug. After the successful execution of the transfer, the data from the
3000 Weighing Operations Archive and the Identification Code Archive
will be cancelled.
• By confirming the Receive command, the Recipes found in the T-Data8
Plug will be transferred and memorized in the equipment, replacing
the ones stored in the memory. After the successful execution of the
transfer, the equipment will recreate the Ingredient/Unload Name
Archive and will cancel the data related to the Usages by Ingredient (see
chapter 4.13.3) and Unloads by Pen (see chapter 4.13.4) totalizators.
• The Data Transfer Function with the T-Data8 Plug device is active only if
the Enabling Data Transfer Preference is enabled (code 71).
chApter 4 45
To Next Page
Loading...
Need help?
General