2
WARNING
CAREFULLY READ AND FOLLOW THE INSTRUCTIONS FOR USE
BEFORE OPERATING THE INSTRUMENT.
Notice
Every effort has been made to avoid errors in text and diagrams; however,
labtech.com assumes no responsibility for any errors, which may appear in this
document.
It is the policy of labtech.com to improve products as new techniques and
components become available. Therefore, labtech.com reserves the right to
change specifications at any time with appropriate verification, validation, and
approvals.
We would appreciate any comments on this document.
Manufacturer
labtech.com
Unit 2 Birch House
17 Brambleside
Bellbrook Ind Estate
Uckfield
TN22 1QQ
United Kingdom
Copyright Information
The contents of this document are the property of labtech.com and are not to be
copied, reproduced, or transferred to another person or persons without prior
written permission.
Copyright labtech.com
All rights reserved.
About the Instructions for Use
Original instructions. This document is intended as Instructions for Use (IFU) for
the labtech.com LT-4500 absorbance reader, which is designed to measure the
light absorbance (optical density) of samples in 96-well microplates. It is intended
as reference and instruction for the user.
This document instructs how to:
• Install the instrument
• Operate the instrument
• Clean and maintain the instrument
Remarks on Screenshots
The version number displayed in screenshots may not always be the one of the
currently released version. Screenshots are replaced only if the content related to
application has changed.
To Next Page
Loading...
Need help?
General