3. Getting Started
28
Hierarchy of Elements
The hierarchy of elements in the Workflow pane is as follows:
1. Plate
2. Part of Plate (Range)
Any desired measurement step can be inserted directly after a plate or range
element. Use Release and Indent to modify the sequence of execution of the
single strip component. Select an element in the Workflow pane, click the right
mouse button and select Release or Indent.
Other elements from the Control bar can be inserted into the hierarchy of a
workflow as follows:
The first Range element is inserted directly after the Plate element; then all
subsequent Range elements can be inserted.
Kinetic steps are possible within a Plate or Range element.
User Request, Comment and Wait steps are possible within a Plate or Range
element.
3.7.3 Info Pane
The Info pane on the right side of the screen displays information that is relevant
for the currently selected program element. Any warnings and errors are shown.
To Next Page
Loading...