6. Application Example
62
Select Method layout/Layout in the Available data box and attach it as a matrix
to the report by clicking Append. Then insert Blank reduction, Mean conc.
(UA/ml) and Cutoff results into the matrix by selecting the corresponding items
and clicking Insert.
Append Graph: Standard curve, Cutoff definition and QC Validation criteria
to the selected data. The data setup part of the report definition procedure is
complete; the Printed Report dialog box looks like this:
On the Header and Footer tabs, define the layout of the header and the footer of
the report (see LT-com Instructions for Use for further details).
Data Export
In the control bar, select Data export from the Data handling item. In this
example, the layout and cutoff results should be stored as ASCII file. Select
Layout and Cutoff results from the Available data window; click the
→ arrow to
insert them into the Selected data window. The screen displays the following
information:
To Next Page
Loading...