6.3.1 Interface Commands 53
| www.lakeshore.com
AUTO Auto Range Command
Input AUTO <off/on>,[term]
Format n
<off/on> Specifies autorange on or off: 0 = Off, 1 = On
Example AUTO 1 [term]—turns on the autorange feature
AUTO? Auto Range Query
Input AUTO? [term]
Returned <off/on>[term]
Format n (refer to command for description)
BEEP Alarm Audible Command
Input BEEP <off/on>, [term]
Format n
<off/on> Specifies alarm audible on or off: 0 = Off, 1 = On
Remarks This command is included to support compatibility with the Model 455 and Model
475 gaussmeters—the alarm audible parameter is now combined with the alarm
command
BEEP? Alarm Audible Query
Input BEEP?[term]
Returned <off/on>[term]
Format n (refer to command for description)
Remarks This command is included to support compatibility with the Model 455 and Model
475 gaussmeters—the alarm audible parameter is now combined with the alarm
command
BRIGT Display Contrast Command
Input BRIGT <contrast value>[term]
Format nn
<contrast value> 1 to 32
Remarks Sets the display contrast for the front panel LCD
BRIGT? Display Contrast Query
Input BRIGT?[term]
Returned <contrast value>[term]
Format nn (refer to command for description)
DFLT Factory Defaults Command
Input DFLT 99[term]
Remarks Sets all configuration values to factory defaults and resets the instrument—the “99”
is included to prevent accidentally setting the unit to defaults
KEYST? Keypad Status Query
Input KEYST? [term]
Returned <keypad status>[term]
Format nn
Remarks Returns a number descriptor of the last key pressed since the last KEYST?—KEYST?
returns a 00 if no key pressed since last query
To Next Page
