6-36 System 824 Training Manual 2/19/98
Step 14 Now press c (or r) to enter the “Intv Save
Ln’s” screen.
Step 15 The options are “Yes” or “No”. Use u or d
to highlight “Yes”. Then press c to enter this
choice.
“Intv Auto Stop” enables or disables
the feature of having the 824 stop
after each Interval is complete. The
next Interval will then begin only
when the RUN/STOP key s is
pushed.
Step 16 Press u or d to highlight “Intv Auto
Stop”.
Step 17 Now press c (or r) to enter the “Intv Auto
Stop” screen.
To Next Page
Loading...
