2-2 System 824 Training Manual 2/19/98
Step 1 Press d until this SLM&RTA (SSA) is high-
lighted.
Step 2 Let’s select this setup now by pressing the
check key: c. At this point, you may be con-
fronted with the Recall screen and a message
that suggests that you have not saved current
measurement data. If the following screen
appears, press the desired choice. In this
example, the choice “No” will be selected.
Step 3 Press r once to highlight “No” (or what-
ever choice you desire)
To Next Page
Loading...
