2-12 System 824 Training Manual 2/19/98
Step 32 Press r to enter the Pk Weighting menu.
You will be required to reset the current mea-
surement. Press c to perform the reset.
Step 33 Press u to highlight C. Then press the check
key c to select and exit.
Step 34 You will now be returned to the Settings
menu. Notice that C is now the current choice
for Peak Weighting.
We will explore the other Settings menus later. Now
we will look at the different SLM measurement views.
Step 35 To exit the SLM Settings menu you can either
press the left key three times, or press SETUP.
For this exercise, press SETUPS. You will be
To Next Page
Loading...
