2/19/98 Setup S 2-11
Step 29 Press u or d highlight SLM.
Step 30 Now press c (or r) to enter SLM Settings
menu.
Here you can see the different parameters that can be
changed for the SLM functions of the 824. The parame-
ters that can be accessed and modified include the
Detector Rate, Weighting, Gain, Transducer (Con-
denser microphone, Electret microphone, and Direct),
and Peak Weighting (A, C, Flat). In this exercise, let’s
change the Peak Weighting to C.
Step 31 Press d until Pk Weighting is highlighted.
To Next Page
Loading...
