2-10 System 824 Training Manual 2/19/98
The field at the bottom of the screen shows the total
duration of the current measurement. This field can
also be used for adjusting the signal gain of the 824.
Press the down arrow d to highlight the gain field.
The following gain values can be established by press-
ing r (or l): 0, 10, 20, 30, 40, and 50.
Step 27 All of these settings (plus a few more) can
also be accessed from within the Setup menu
of the 824. Press SETUP S to access this
menu.
Step 28 The Edit Settings function is currently high-
lighted. Press the check key c (or r) to
enter Settings menu.
Here we can access menus to change the “Title” that
appears in the printed reports; the SLM (Sound Level
Meter) parameters; the RTA (Real Time Analyzer)
parameters; the RTA Intervals; the Report settings; and
the I/O (input/Output) Controls. Let’s enter the SLM
Settings menu.
To Next Page
Loading...
