2/19/98 View V 3-13
Step 18 Press l three times to exit the Settings
menu and back to View. You will now see the
1/1 octave band data in the graphical display.
For purposes of this exercise, let’s change the display
back to 1/3 octave bands. We’ll repeat the process we
just completed.
Step 19 First press c. Next press d to highlight
“Settings”, then press c again. Verify that
RTA is highlighted, then press c once more.
Press d to highlight “Bandwidth”. Once
more, press c to enter the “Bandwidth”
menu. Press d to highlight “1/3”. Then
press c to actuate the change back to 1/3
octave analysis. To get back to the View dis-
play, press l three times. We should now
have 1/3 octave band data in the graphical
display.
To Next Page
Loading...
