2/19/98 Data D 4-3
Step 4 Notice that the stored data record now
appears in the Data Files list. Press d to
highlight the stored record.
Step 5 To see information on the stored measure-
ment, press r.
This screen shows the date and time of the measure-
ment beginning and end. It also displays the measure-
ment type (SLM&RTA SSA), the measurement label,
and the size of the data file in bytes. If you have multi-
ple data files (indicated at top right corner of screen),
you can cycle through the Data Files info for each mea-
surement by pressing u or d.
Step 6 You can recall stored data by pressing c.
Within this menu, you can recall the data you previ-
ously selected. If you have multiple stored data files,
you can recall them using “Beginning”, “Ending”, or
“Find”.
To Next Page
Loading...
