5-6 System 824 Training Manual 2/19/98
This screen displays the date and
time of the last 824 system calibra-
tion and calibration check. We will
perform a calibration next.
Step 2 To view the calibration information, press c
to enter the “Calibration” screen.
Step 3 Press TOOLS T to return to the Tools menu.
Step 4 Next, let’s press r to enter the “Calibration”
menu to check and change the calibration val-
ues.
Step 5 To check the current calibration, confirm that
“Check” is highlighted in the Calibration
menu.
To Next Page
Loading...
