2/19/98 Tools T 5-35
The screen becomes active during
serial communication with a com-
puter. You can monitor the commu-
nication process within this window.
Step 2 Press c to enter the “Communication”
screen.
Here, you can establish and modify
the parameters associated with com-
munication to an external device,
such as a computer or modem. The
options are Baud Rate, Serial
Address, and Flow Control.
Step 3 Now, press c again to enter the “Serial Com-
munication” screen.
Step 4 Use u or d to highlight “Baud Rate”.
Press c (or r) to enable this selection.
Your baud rate choices are: 300, 1200, 2400, 9600, 19200,
28800, 57600, and 115K.
To Next Page
Loading...
Need help?
General
