5-36 System 824 Training Manual 2/19/98
Step 5 Select your baud rate choice using u or d.
Press c to enable this selection.
Step 6 Now press d to highlight “Serial Address”.
Here you can establish a serial
address for the 824 for situations
where you may have multiple devices
connected via the computer serial
port.
Step 7 Press c (or r) to enter the “Serial Address”
screen.
Step 8 Use the u and d arrow keys increment
through the address numbers, while l and
r toggles between the three address fields.
Press c when you have selected the desired
address.
To Next Page
Loading...
