2/19/98 Tools T 5-37
Step 9 Now press d to highlight “Flow Control”.
Within this menu, you can select the
method of handshaking appropriate
for the device which you plan to com-
municate with. The choices are:
“None”, “Hdwr” (hardware),
“Xoff”, and “Both”.
Step 10 Press c (or r) to enter the “Flow Control”
menu.
Step 11 Choose your Flow Control selection using
u or d. Press c to enable this choice.
Step 12 Press l to return to the TOOLS menu. Press
l one more time to exit.
To Next Page
Loading...
