Section 9 - Specifications
Page 37
Measurement Range:
Distance: 0 to 3,280 ft (1,000 m) typical,
6,560 ft (2,000 m) max to reflective target
Inclination: ±90 degrees
Accuracy:
Distance: ±8 inches (±20 cm) to high quality targets
±1 yd (±1 m) to low quality targets
Refer to TruTargeting page 4.
Note: Target quality can be affected by
atmospheric conditions, such as heat shimmer,
dust, target reflectance, traverse angle to target
and beam spread.
Inclination: ±0.25 degrees
Measurement Modes: Horizontal Distance, Vertical Distance,
Slope Distance and Inclination, 3-point
flexible Height routine with auto sequencing,
and 2D Missing Line routine.
Target Modes: Standard, Closest, Farthest, Continuous, and
Filter (requires reflector and foliage filter).
Declaration of Conformity
Laser Technology, Inc. affirms that it manufactures the
TruPulse 200 which fulfill the requirements of the
Directive of Electromagnetic Compatibility (EMC)
89/336/EEC of May 3, 1989 as amended by 93/34/EEC
of April 28, 1992 and 93/68/EEC, Article 5 of July 22,
1993.
Please contact your LTI Sales Representative or
Authorized LTI Distributor to obtain a copy of the
Declaration of Conformity.
To Next Page
Loading...
Need help?
General
