Laser Technology TruPulse 200 User Manual

Laser Technology, Inc. TruPulse 200 User's Manual 6
th
Edition
Page 16
Bluetooth Enable
Bluetooth wireless technology is an industry standard specification for short-range wireless
connectivity. As a short-range radio link, Bluetooth replaces cable connections between devices
allowing you to download measurement data to any Bluetooth enabled PC device such as a
computer, smart device, etc. The TruPulse cannot connect to Apple iOS devices.
• TruPulse Bluetooth offers serial port service to connect to an RS-232 style serial connection.
It replaces the download cable from the TruPulse to any Bluetooth enabled PC device.
• TruPulse Bluetooth is a slave device. Bluetooth master devices can detect the TruPulse when
the TruPulse is powered ON and the Bluetooth option is enabled.
To toggle the Bluetooth selection:
1. From the Measurement Mode, press
for 4 seconds to access the System Setup Mode.
“UnitS” will appear in the Main Display.
2. Press
to display the “bt” option.
3. Press
to select the Bluetooth Enable Mode.
4. Press
or to display the other “bt” options.
o on: Turns the Bluetooth communication on.
o oFF: Turns the Bluetooth communication off.
o EnC: Bluetooth loop function for MapStar TruAngle. See note on Page 17.
5. Press
to select the Bluetooth option and return to the Measurement Mode.
Press the FIRE button
to select the Bluetooth
option and return to the
Measurement Mode.
(bt_on)

(btEnC)





Press the
FIRE button.
Figure #13

Laser Technology TruPulse 200 Specifications

General

Brand	Laser Technology
Model	TruPulse 200
Category	Measuring Instruments
Language	English