Laser Technology TruPulse 200X User Manual

LTI TruPulse 360R User’s Manual Page 17
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
Restore Default Settings
It is possible to restore the TruPulse 360R’s default settings. Restoring the default settings affects
some of the system setup options.
The table below lists the parameters and the associated default settings. The third column lists the
page reference for additional information.
Parameter Default Value
Refer to Page
Number
Measurement Mode HD 33
Distance Units Feet 19
Inclination Units Degrees 19
Bluetooth oFF 20
Declination 0.00 25

Restoring default settings:
 Does not effect Tilt Sensor calibration or Horizontal Angle Compass Calibration.
 Does cancel/clear serial command to Bluetooth ALL ON.
To restore the default settings:
1. Simultaneously press-and-hold the
, , and buttons for
approximately 5 seconds.

Laser Technology TruPulse 200X Specifications

General

Brand	Laser Technology
Model	TruPulse 200X
Category	Measuring Instruments
Language	English