Laser Technology TruPulse 200X User Manual

LTI TruPulse 360R User’s Manual Page 21
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.

 Each time the TruPulse 360R is powered ON, it will return to the same
Bluetooth setting that was last used.
 Bluetooth Version 2.0 Class 2.
 The MapStar TruAngle current production firmware version 1.17 has a
Bluetooth® Encoder Loop feature. Mapping systems consisting of a
TruPulse and TruAngle can now work via Bluetooth with a wider variety of
data collectors. The MapStar TruAngle current production firmware version
1.17 contains a Bluetooth® Encoder Loop feature so a cable is no longer
necessary. Set your TruPulse Bluetooth setting to “btEnc” to transfer
measurement data that includes the TruAngle’s angle measurement to
Bluetooth® devices.
Refer to the instructions below when connecting your TruPulse 360R to another Bluetooth device.
This information is provided as a general guideline; please refer to the product documentation for
your specific Bluetooth device.
1. Toggle the TruPulse Bluetooth option ON and return to the measurement
mode (see previous page). A host device can now detect the Bluetooth
communication from the TruPulse 360R.
o Refer to the host device documentation for connecting to Bluetooth devices.
2. Use the Bluetooth Manager to scan for the TruPulse Bluetooth module. The TruPulse Bluetooth
will be named “TP360RB000000” where “000000” is the serial number of your TruPulse 360R.
3. Tap the icon that matches your TruPulse Bluetooth device.
4. You may be prompted to enter:
o Passkey = 1111
o Service Selection = SPP Slave
o Select (long press) “Connect”. The Bluetooth Manager on the host device should find and
display the active connection status.

Bluetooth troubleshooting tips:
• TruPulse: Verify that the TruPulse Bluetooth option is toggled ON.
• Bluetooth enable PC device: Verify that the Bluetooth connection is active.
• Verify that the Bluetooth device is physically located within the wireless
transmission range of the TruPulse 360R.
o Transmission range can vary depending upon (1) position relative to
the TruPulse or (2) type of Bluetooth® connection.

Laser Technology TruPulse 200X Specifications

General

Brand	Laser Technology
Model	TruPulse 200X
Category	Measuring Instruments
Language	English