Laser Technology TruPulse 200X User Manual

LTI TruPulse 360R User’s Manual Page 20
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
Enable Bluetooth
Bluetooth wireless technology is an industry standard specification for short-range wireless
connectivity. As a short-range radio link, Bluetooth replaces cable connections between devices
allowing you to download measurement data to any Bluetooth enabled PC device such as a laptop PC,
Pocket PC, etc.
• TruPulse Bluetooth offers serial port service to connect to an RS-232 style serial connection.
It replaces the download cable from the TruPulse 360R to any Bluetooth enabled PC device.
• TruPulse Bluetooth is a slave device. Bluetooth master devices can detect the TruPulse 360
R
when the instru
ment is powered ON and the Bluetooth option is enabled.
To toggle the Bluetooth selection:
1. From the Measurement Mode, press
for 4 seconds to access the System Setup Mode. “UnitS”
will appear in the Main Display.
2. Press
to display the “bt” option as shown in Figure #12 below.
3.
Press
to select the Bluetooth Enable Mode.
4. Press
or to display the next “bt” option.
o on: Turns the Bluetooth communication on.
o oFF: Turns the Bluetooth communication off.
o EnC: Bluetooth loop function for MapStar TruAngle.
See note on the next page.
5.Press
to select the Bluetooth option and return to the Measurement Mode.
Figure #12

Laser Technology TruPulse 200X Specifications

General

Brand	Laser Technology
Model	TruPulse 200X
Category	Measuring Instruments
Language	English