Laser Technology TruPulse 200X User Manual

LTI TruPulse 360R User’s Manual Page 48
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
 Set Target Mode: TM
Normal 0
Continuous 1
Closest 2
Farthest 3
Filter 4
 Get Battery Voltage: BV (millivolts)
Example Reply: 3125 = 3.125 volts
 Get Instrument Status: TS
Battery Voltage OK 0
Battery Voltage below
Warning Level (2.15V) 2
 Set Shutdown Timeout – Bluetooth OFF: NT
Time in Minutes (0...120) n
Never Shutdown 0
Default 2
 Set Shutdown Timeout – Bluetooth ON: BT
Time in Minutes (0...120) n
Never Shutdown 0
Default 30
 Set Instrument Status Transmit Interval: SI
Time in Minutes (0...120) n
Never Transmit 0
Default 0
 Turn Bluetooth ON/OFF: BO
Bluetooth ON 1
Bluetooth OFF 0
 Turn Off TruPulse 360R: PO
 Set Declination: DE,n.n
Where n.n degrees
 Calibration
Do mag cal (repeat 8 times while rotating instrument. See page 31.): MC
Do tilt cal (repeat 8 times while rotating instrument. See page 23.): TC
Cancel Calibration: CC

Laser Technology TruPulse 200X Specifications

General

Brand	Laser Technology
Model	TruPulse 200X
Category	Measuring Instruments
Language	English