About X-431 Station
DiagnosticsToolbox & AppsFAQ
Initial Use
105
www.x431.com +86 755 8455 7891
LAUNCH
Station
User's Guide
following:
1. Open and edit a snapshot;
2. Select “Joint the expert database” (refer to the following illustration), and then tap
to save the
waveform being displayed on the screen as REF.
Fig. Oscilloscope-14
Tap or click
and then [Expert Reference] to enter, the following operation can be done:
: To load and recall the selected le.
: To delete the selected le.
: To edit the selected le.
<2> Base Reference
Preset waveforms of some sensors are available for your reference.
Fig. Oscilloscope-15
To Next Page
Loading...
