About X-431 Station
Diagnostics
Toolbox & Apps
FAQ
Initial Use
42
www.x431.com +86 755 8455 7891
LAUNCH
Station
User's Guide
Fig. L-9
Report: Saves the diagnostic result as a report.
To save it as a diagnostic report, please proceed as follows:
1. Select the report type and ll in the vehicle information: Tap or click
to select the report type from the
option list and input the required information, and then tap or click “OK” to go to the next step.
2. Fill the shop information and technician information:
• If the Shop information was not lled before, the corresponding input elds will display blank. Input the
shop information on this pop-up window, it will be automatically generated when the diagnostic report is
saved.
Note: Alternatively you can also set it in “User Info” -> “Settings” -> “Shop Information”. After you saved the
information, it will be automatically generated every time the diagnostic report is saved. All vehicle and workshop
information will be appended as tags on the diagnostic report.
• In the Technician Name eld, tap or click “Add” to create a technician list
(*If the technician list is already
available, tap
directly to select it from the pull-down list)
.
To ignore the workshop information, tap or click “Skip” to go to the next step.
To Next Page
Loading...
Need help?
General
