LeapFrog 3d printer User Manual

Manual Leapfrog Creatr
37 Leapfrog BV
I have a STL file
A STL file is a file format that contains the 3D design of your file. If you have a STL file, you will need to
convert it to a printable file format called G-code. Below, the steps how to do this are explained.
 Click on the Load” button.
 Open a STL file.
 Go to the Slicer” tab.

LeapFrog 3d printer Specifications

General

Brand	LeapFrog
Model	3d printer
Category	3D Printers
Language	English