LeapFrog 3d printer User Manual

Manual Leapfrog Creatr
72 Leapfrog BV
o Place and tighten the new thermistor in its place and connect the connector.
o Slide the heat cartridge into place, and tighten the Allen screw again.
o Slide the hot end into the extruder carriage and tighten the other Allen screw again (go
through the height difference extruder steps to calibrate the height, see 3.6).

LeapFrog 3d printer Specifications

General

Brand	LeapFrog
Model	3d printer
Category	3D Printers
Language	English