X-Stream Operator’s Manual
WM-OM-E Rev I 171
Excluded Parameters
Parameters that are already the result of parameter math operations are excluded. If they are
included in a remote control setup command, an error message is generated and the setup
canceled.
• Excluded parameters are as follows:
• delta clock-to-data near (DC2D)
• delta clock-to-data next (DC2DPOS)
• delta clock-to-data previous (DC2DNEG)
• delta delay (DDLY)
• delta time at level (DTLEV)
• phase (PHASE)
• resolution (RES)
• mTnTmT shift (BEES)
• mTnTmT shift sigma (BEESS)
• mTnTmT shift sigma - list (BEESS)
Parameter Script Parameter Math
In addition to the arithmetic operations, the Parameter Math feature allows you to use VBScript or
JavaScript to write your own script for one or two measurements and produce a result that suits
your needs. Code entry is done in the Script Editor window directly on the instrument. You can also
import an existing script.
To Next Page
Loading...
