Zoom and Table Buttons for History
The Zoom and Table buttons are used as described in The WavePilot
Control Area and The SuperKnob Overview (on page 25).
LABNOTEBOOK
When first pressing the LabNotebook function button, the LabNotebook
dialog is shown. The button toggles between opening and closing the
LabNotebook dialog - unless you already have LabNotebook entries
stored. With LabNotebook entries already stored subsequent presses of
the LabNotebook function button:
opens the LabNotebook dialog and your first My Notebook Entry
is shown on the display area in Preview mode.
closes the LabNotebook dialog and the My Notebook Entry
preview.
Using the SuperKnob with LabNotebook
As mentioned, with LabNotebook entries already stored a subsequent
press of the LabNotebook function button shows the preview along with
the dialog. You can then turn the SuperKnob to move through entries
shown in My Notebook Entries on the LabNotebook dialog. Pushing the
SuperKnob performs a Flashback (Recall) of the stored entry selected in
the My Notebook Entries on the LabNotebook dialog.
Note: Zoom and Table buttons are not used for LabNotebook.
SPECTRUM
When first pressing the Spectrum function button, the Spectrum dialog is
shown with table data showing in a column to the left of the main display
area. Subsequent presses of the Spectrum function button produce the
following results:
Spectrum Analysis is turned Off and the SpectrumAnalyzer dialog
is Closed.
Spectrum Analysis is turned On and you click Close on the
SpectrumAnalyzer dialog or open a different dialog (say, the Zoom
dialog), and then click the Spectrum function button, the
SpectrumAnalyzer dialog is Opened.
To Next Page