Zoom and Table Buttons for Decode
The Zoom and Table buttons are used as described in The WavePilot
Control Area and The SuperKnob Overview (on page 25). Decode tables
are shown beneath the main display area.
WAVESCAN
When first pressing the WaveScan function button, the WaveScan dialog
is shown with table data showing in a column to the left of the main
display area. Subsequent presses of the WaveScan function button
produce the following results:
WaveScan is turned On and you click Close on the WaveScan
dialog or open a different dialog (say, the Zoom dialog), and then
click the WaveScan function button, the WaveScan dialog is
Opened.
WaveScan is turned Off and the WaveScan dialog is Closed.
Zoom and Table Buttons for WaveScan
The Zoom and Table buttons are used as described in The WavePilot
Control Area and The SuperKnob Overview (on page 25).
HISTORY
When first pressing the History function button, the History dialog is
shown with table data showing in a column to the left of the main display
area. Subsequent presses of the History function button produce the
following results:
History is turned On and you click Close on the History dialog or
open a different dialog (say, the Zoom dialog), and then click the
History function button, the History dialog is Opened.
History is turned Off and the History dialog is Closed.
On the History dialog, a Capacity control is provided.
Note: A default value for the Capacity control is generated based on
your instrument's specific Acquisition Memory Setting (it also varies
based on specific setups, configurations, and settings at any given
time).
To Next Page