LEGOeducation.com
EV3 Brick
The EV3 Brick requires six AA/LR6 batteries if the EV3 Rechargeable
Battery is not used. Alkaline or rechargeable Lithium Ion AA batteries
are recommended. The AA batteries option is a good choice when
a little more weight is desirable in your robot.
To install the AA batteries, remove the battery cover on the back of
the EV3 Brick by pressing the two plastic tabs on the side. After you
have inserted the six AA batteries, attach the battery cover again.
SOME IMPORTANT INFORMATION ABOUT BATTERIES:
+ Never use different kinds of batteries together (including mixing
old and new).
+ Remove batteries from the EV3 Brick when not in use.
+ Never use damaged batteries.
+
Use the correct battery charger under the supervision of an adult.
+ Never attempt to recharge batteries that are not rechargeable.
Note: If your batteries are weak, the Brick Status Light may stay red
after you press the Start button, while the Display continues to say
‘Starting’.
POWER-SAVING PRACTICES
+ Remove batteries between use.
Remember to keep each set of batteries in its own storage
container so they can be used together.
+ Reduce Volume.
+ Adjust Sleep Setting.
+ Turn off Bluetooth and Wi-Fi when not in use.
+ Avoid unnecessary wear on the motors.
Low Battery Power Indicator
EV3 TECHNOLOGY
To Next Page
Loading...
Need help?
General