LEGRAND CS102 - 4.4.3. WakeOnLAN Configuration

CS102 SNMP Card
User Manual
41
4.4.3. WakeOnLAN
The Wake On LAN ("WOL") feature can turn on a PC or compatible device, via its MAC address.
After the clients shut down due to UPS shutdown events and after the shutdown events return to
normal, the WOL packet will be sent to the client to restart the PC.
Up to 24 client MAC addresses can be set.
Setting
Item
Description
Repeating Times
The repeat times of sending WOL packet to client. Range: 1~99.
Interval Timer
The time interval (in seconds) between two actions of sending the WOL
packet to the client. Range: 1~999 seconds.
WOL Table
Item
Description
Test
If this option is selected, the WOL packet will send to client to start up PC after
pressing the "WOL Test " button.
MAC Address
Enter the MAC address of the device you want to boot using a WOL packet.
Control
Enable, or disable, the WOL function.
Description
User description. The maximum length of the string is 31 characters.