LEGRAND CS102 - Appendix - Technical Information; LED Indicators; Technical Specifications

CS102 SNMP Card
User Manual
61
Appendix - Technical Information
LED Definition
The function of the CS102 are indicated by the Status and Network LEDs, as listed in the
following table.
Port
Green LED
Yellow LED
Function
Network
ON
Flashing
Ethernet 100 Traffic
OFF
Flashing
Ethernet 10 Traffic
ON
OFF
100 Base-TX Ready
OFF
ON
10 Base-T Ready
OFF
OFF
Ethernet Disconnection
Status
ON
OFF
Power On (Normal Status)
ON
Flashing
RS232 Port Activity (UPS site)
Two LED cross
Flashing
Two LED cross
Flashing
Auto Diagnostic Mode (MFG mode)
ON
ON
Auto Diagnostic Failed (MFG mode)
OFF
ON
Hardware Error
Technical Specification
Function
Description
Processor
ARM9 180 MHz
Memory
8 MB Flash memory (32 bit)
Network
Auto-sense 10/100 Mbps Fast Ethernet
Power Input
DC +5.5 ~ 40V
Power Consumption
Maximum 3.0 Watts
Operating Temperature
0 ~ 40 C
Operating Humidity
20 ~ 95 % (non-condensing)
Dimensions (W x D x H)
68 x 133 x 43
Weight
69 g
WI-FI dongle Standard
2.4GHz: IEEE 802.11b, 802.11g, 802.11n
WI-FI dongle Security
WEP 64/128-bit, WPA, WPA2, and WPA3
EMC Regulation
CE