LEGRAND CS102 - 4.2.3. Alerts and Logs

CS102 SNMP Card
User Manual
25
Note
“Weekly Schedule” and “Special Day” are events related to the scheduler (see "UPS On/Off
Schedule"), so the "Discontinue shutdown if event restored" option does not apply to these
events.
4.2.3. Alert & Logs
Alert Table
This table displays the currently active alarms. This page will refresh automatically.
Item
Description
ID
Sequential number, it indicates the sequence of activation of alarms. This
number will be reset after CS102 reboot.
Time
Data and time in which the CS102 detected the alarm. The correctness of the
date/time depends on the clock inside the CS102.
Description
The description of the alarm