LEGRAND CS102 - 5.2.3. SSH Account Control

CS102 SNMP Card
User Manual
51
5.2.3. Account Control Group Setting
From the main configuration menu, press “3” to modify the related account control
identification information.
============================================================
CS102 Configuration Utility
UPS Model : Keor SPE
============================================================
1. IP, Time and System Group
2. Network Control Group
3. Account Control Group
4. Email Group
5. SNMP Group
0. Back to Main Menu
Please Enter Your Choice => 3
1. Select “1~3” to enter the related account control pages.
============================================================
CS102 Configuration Utility
[Account Control Group]
============================================================
1. RADIUS Group
2. Access Control Table
3. Super User Group
0. Return to previous menu
Please Enter Your Choice =>
2. Press “1” to enter the related RADIUS settings:
============================================================
Account Control Group
[RADIUS Group]
============================================================
1. RADIUS Port :
1812
2. RADIUS Server Settings
3. Packet Timeout :
1
4. Packet Retry :
3
0. Return to previous menu
Please Enter Your Choice =>
After completing these settings, press “0” to return to the previous menu.