Chapter 1 - Introduction
CS102 can manage UPS systems using their native serial protocols. User can use web browser or
any NMS, SNMP, or MODBUS manager to manage UPS via Ethernet.
The CS102 also provides shutdown schedules for different operating systems: for example, it can
send a shutdown command in the event of a scheduled shutdown, utility power failure, UPS low
battery condition, UPS overload, UPS overtemperature, and other alarms. All extinguishing events
are user configurable. The shutdown software will perform an orderly automatic shutdown to
avoid crashing clients or servers.
1.1. Features
◼ Real-time UPS health monitoring
◼ Comprehensive UPS management and flexible configuration via Web Browser, NMS, Telnet,
and SNMP.
◼ Automatic events notification via E-mail, and SNMP Trap.
◼ Graceful shutdown to protect up to 250 servers/workstations from data loss due to power
outage.
◼ Assigned IP automatically via DHCP or BOOTP.
◼ Scheduling shutdown/startup/reboot of UPS via remote control.
◼ Regularly records UPS parameters for statistical analysis and event diagnostics.
◼ Support for standard UPS MIB (RFC1628).
◼ Auto-sense to works in the 10/100Mbps fast Ethernet network environment.
◼ WOL function supported.
◼ Configuration utility simplifies the firmware upgrade process.
◼ Support Radius and NTLM V1.
◼ IPv4 and IPv6 dual stack.
To Next Page
Loading...
