LEGRAND CS102 User Manual

CS102 SNMP Card
User Manual
49
5.2.2. Network Control Group setting
From the main configuration menu, press “2” to enabled/disabled the network protocols:
============================================================
CS102 Configuration Utility
UPS Model : Keor SPE
============================================================
1. IP, Time and System Group
2. Network Control Group
3. Account Control Group
4. Email Group
5. SNMP Group
0. Back to Main Menu
Please Enter Your Choice => 2
1. Select “6~9” to enter the related network control pages.
============================================================
CS102 Configuration Utility
[Network Control Group]
============================================================
1. BOOTP/DHCP Control :
Disabled
2. Upgrade Control :
Enabled
3. Ping Echo Control :
Disabled
4. UPnP Control :
Disabled
5. HTTP Security :
Enabled
6. HTTP Control Group
7. SNMP Control Group
8. SMTP Control Group
9. SSH Control Group
0. Return to previous menu
Please Enter Your Choice =>
2. Enter the related HTTP setting as shown below.
============================================================
Network Control Group
[HTTP Control Group]
============================================================
1. HTTP Control :
Enabled
2. HTTP Port :
80
0. Return to previous menu
Please Enter Your Choice =>
After completing these settings, press “0” to return to the previous menu.

LEGRAND CS102 Specifications

General

Brand	LEGRAND
Model	CS102
Category	UPS
Language	English