LEGRAND CS102 - Page 55

CS102 SNMP Card
User Manual
55
============================================================
CS102 Configuration Utility
[SNMP Group]
============================================================
1. Trap Receiver Table
2. SNMPv3 USM Table
0. Return to previous menu
Please Enter Your Choice => 1
1. Enter the related Trap receiver setting as shown below.
============================================================
SNMP Group
[Trap Receiver Table]
============================================================
IP Address
Community/Name
Trap Type
Severity
Description
--------------------------------------------------------------------
[1]
*
None
Information
[2]
*
None
Information
[3]
*
None
Information
[4]
*
None
Information
[5]
*
None
Information
[6]
*
None
Information
[7]
*
None
Information
[8]
*
None
Information
Command :
1. Display one entry
2. Modify one entry
0. Return to previous menu
Please Enter Your Choice =>
After completing these settings, press “0” to return to the previous menu.