Safety Notes
33Leica HM500/Ref. 10 715 697/Version B
Manufacturer’s declaration of electromagnetic compatibility (EMC)
This "Guidance and manufacturer’s declaration" document is based on EN 60601-1-2:2001.
Valid for the "HM500/HM500 Dental system" (system description according to page 12,13)
Table 201 from EN 60601-1-2:2001
Guidance and manufacturer’s declaration – electromagnetic emissions
The Leica HM500 headmounted microscope is intended for operation in an environment as specified below.
The customer or the user of the Leica HM500 headmounted microscope should make sure that it is used
in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
HF emissions Group 1 The Leica HM500 headmounted microscope uses in accordance
with CISPR 11 HF energy exclusively for its internal function. Therefore, its HF emissions
are very low and are not likely to cause any interference in nearby elec-
tronic equipment.
HF emissions Class B The Leica HM500 headmounted microscope, in accordance
with CISPR 11 is suitable for use in establishments other than domestic and those
directly connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions Class A
according to
IEC 61000-3-2
Emissions of compliant
voltage fluctuations/
flicker according
to IEC 61000-3-3
To Next Page
Loading...