Field Option Description
Active Lan-
guage
Display only Displays the current language and version
numb
er selected for the instrument.
EDM-Firm-
ware
Display only Displays the version number of the EDM
firmware.
Oper. Sys-
tem
Display only Displays the operating system of the instru-
ment.
Page 3/5 or Sensor
Field Option Description
Loader
Angle Hz
Display only Loader version for the horizontal angle sys-
tem
Loader
Angle V
Display only Loader version for the vertical angle system
Loader Incli-
nat.
Display only Loader version for the inclination system
Angle Hz Display only Software version of the horizontal angle sys-
tem
Angle V Display only Software version of the vertical angle system
Inclination Display only Software version of the inclination system
AutoHeight Display only
Displays the firmware version of the
AutoHeight laser plummet.
Available for TS07.
Page 4/5 or Mem.
Displa
ys job-specific memory information such as the number of stored sta-
tions and fixpoints within a job, the number of recorded data blocks, for exam-
ple measured points, or codes within a job, and the memory space occupied.
☞
Before pressing F
ormat, to format the internal memory, ensure
that all important data is first transferred to a computer. Jobs, for-
mats, codelists, configuration files, uploaded languages and firm-
ware are deleted by formatting.
☞
Despite an automatic defragmentation, the memory gets fragmen-
ted after a while. Please format the internal memory periodically to
maintain the instrument performance.
Page 5/5 or Dates
Field Option Description
Maint.-End
Da
te
Display only Displays the end date of the maintenance
agreement for the instrument firmware.
mySec.Rene
wal Date
Display only The date when the instrument must be con-
nected to mySecurity in oder to renew the
security functionality.
Next Service
Date
Display only Displays the date of the next service check
required. The field can be invisible if turned
off by the service reminder.
64 Settings
To Next Page
