Leica TS07 - Page 83

Key Description
B&Dist
To enter the direction and horizontal distance to a stake out
point.
Manual To manually enter coordinates of a point.
Survey To switch to the Survey app. Press ESC to return to the Set-
out screen.
☞
Refer to "3.8 Graphic Symbols" for a description of the graphic ele-
ments.
Description of fields
Field
Option Description
Find Display only Available when no filter is applied. Value for
Point ID search. After entry, the firmware
searches for matching points, and displays
these in PtID: If a matching point doesn’t
exist the pointsearch screen opens.
Radius Selectable list Available when the point filter is active. the
defined radius from a particular point.
Range Display only Available when the range is active. The
defined range of points. For long point IDs,
the last digits are be shown and the first dig-
its are cut.
Pt Type/ID Display only Displays the type of point selected.
•
Fixpt., or
•
Meas.
ΔHz Display only Angle offset: Positive if stake out point is to
the right of the measured point.
D Display only Horizontal offset: Positive if stake out point
is further away than the measured point.
D Display only Height offset: Positive if stake out point is
higher than the measured point.
ΔL Display only Longitudinal offset: Positive if stake out point
is further away than the measured point.
ΔT Display only Perpendicular offset: Positive if stake out
point is to the right of the measured point.
ΔH Display only Height offset: Positive if stake out point is
higher than the measured point.
Setout
Apps 83